Please see here about the isovolta Insulating material.
ISONOM® NM or NMNcombinations of Nomex® with PET film, Thermal Class F-H(155℃-180℃) for slot and phases insulation in low vlotage motors or as interlayer insulation in dry transformers |
2-Layers with calendered Nomex® |
ISONOM NM 0880Nomex® Type 464/050 |
ISONOM NM 8 0882Nomex® Type 416/080 |
ISONOM NM 13 0950Nomex® Type 416/130 |
ISONOM NM 18 2883Nomex® Type 410/180 |
ISONOM NM 25 2882Nomex® Type 410/250 |
3-Layers with calendered Nomex® |
ISONOM NMN 0881Nomex® Type 464/050 |
ISONOM NMN 2796Nomex® Type 416/050 |
ISONOM NMN 8 0883Nomex® Type 416/080 |
ISONOM NMN 8 0884Nomex® Type 416/080 pre temperature treatment |
ISONOM NMN 13 0967Nomex® Type 416/130, with special PET film |
ISONOM NMN 13 2944Nomex® Type 416/130 |
ISONOM NMN PH 2045Nomex® Type 464/050, adhesive coating on one side |
ISONOM NMN 8 2800Nomex® Type 418/080, contains mica |
ISONOM ME 2459NMN with calendered Nomex® Type 416/080, contains accelerator |
Materials with uncalendered Nomex® type411/130 |
ISONOM NM 20412-layer material |
ISONOM NMN 20353-layer material |
ISONOM NM PH 2682PET film adhesive coated |
Materials f ür special smoothness |
ISONOM NMNM 2298Nomex® Type 464/050, thin PET film on one side |
ISONOM NMNM 2798Nomex® Type 416/080, thin PET film on one side |
ISONOM 2896Nomex® Type 410/250; one side treated |
Special Normax® Combinations |
ISONOM NMG 13 2042Nomex® Type 411/130 with PET film and glass cloth combination |
ISONOM NGN 0888Nomex® Type 464/050 on both sides |
ISONOM BNB 0582Nomex® Type 410/180, glass fleece on both sides |
ISONOM® NK or NKNcombination of Nomex® and Polyimid film with Thermal Class H-C (180℃-200℃). For slot and phase insulation for motors subject to high thermal stress or as interlayer insulation in dry transformers |
2-Layers with calendered Nomex® |
ISONOM NK 2530Nomex® Type 464/050 |
ISONOM NK 8 2261Nomex® Type 416/080 |
ISONOM NK 18 2563Nomex® Type 410/180 |
3-Layers with calendered Nomex® |
ISONOM NK 0885Nomex® Type 464/050 |
ISONOM NK 8 0886Nomex® Type 416/080 |
ISONOM NK 8B 0886Nomex® Type 416/080, different resin formulation for special applications |
ISONOM NKN 13 0887Nomex® Type 416/130 |
ISONOM NKN 13B 0887Nomex® Type 416/080, different resin formulation for special applications |
ISONOM NKN 18 2281Nomex® Type 410/180 |
ISONOM NKN 25 2664Nomex® Type 410/250 |
ISONOM NKN 2279Nomex® Type 416/080 and Type 416/130 |
ISONOM NKN 2558Nomex® Type 410/080 and Type 410/130 |
ISONOM KNK 2700Nomex® Type 464/050 or 416/080, PI film on both sides |
Materials with uncalendered Nomex® Type411/130 |
ISONOM NKN 20393-Layers |
ISISONOM NK 30082-Layers |
VOLTAFLEX® DM or DMDcombinations with PET film and PET fleece. For slot and phases insulation in low voltage motors or as interlayer insulation in dry transformers |
2-Layers with 2 mil-PET-fleece |
VOLTAFLEX E 0936Unsaturated(2,5 mil PET-fleece), white, Thermal Class B-F (130℃-150℃) |
VOLTAFLEX E 0951Unsaturated, white, Thermal Class B-F (130℃-150℃) |
VOLTAFLEX 6644Saturated, blue, Thermal Class F(155℃) |
VOLTAFLEX PH 2841Adhesive coated, white, Thermal Class B-F(130℃-155℃) |
3-Layers with 2 mil-PET-fleece |
VOLTAFLEX 2598Unsaturated, white, Thermal Class B-F(130℃-155℃) |
VOLTAFLEX F 6642Saturated, blue, Thermal Class F(155℃) |
VOLTAFLEX F 6643Saturated, special PET film, blue, Thermal Class F(155℃) |
VOLTAFLEX F 0768Saturated, extra smooth surface, blue, Thermal Class F(155℃) |
VOLTAFLEX F 2853Saturated, extra smooth surface, blue, Thermal Class F(155℃) |
3-Layers with 3 mil-PET-fleece |
VOLTAFLEX 3 6641Semi saturated, white, Thermal Class B-F(130℃-155℃) |
VOLTAFLEX 3F 6641Saturated, blue, Thermal Class F(155℃) |
VOLTAFLEX F 2916Saturated, extra smooth surface, blue, Thermal Class F(155℃) |
VOLTAFLEX DMD3 0180Saturated, extra smooth surfaces, white, Thermal Class F(155℃) |
3-Layers with 5 mil-PET-fleece |
VOLTAFLEX 3 6641Saturated, extra smooth surface, blue, Thermal Class F(155℃) |
VOLTAFLEX F 2931Unsaturated, white, Thermal Class F(155℃) |
VOLTAFLEX DMD5 0180Saturated, extra smooth surface, white, Thermal Class F(180℃) |
Special Combinations |
VOLTAFLEX GK 2797PI film with glass cloth, Thermal Class H-C(180℃-200℃) |
VOLTAFLEX GKG 2064PI film with glass cloth, Thermal Class H-C(180℃-200℃) |
ISOFLEX P 724Mica paper with glass cloth, both sides covered with PET film, Thermal Class F(155℃) |
ISOFLEX P 725Mica paper with glass cloth, both sides covered with PET film, Thermal Class F(155℃) |
VOLTAFLEX 2526Extra absorbent, white, Thermal Class B-F(130℃-155℃) |
VOLTAFLEX ME 2761Extra absorbent, contains accelerator, red, Thermal Class B-F(130℃-155℃) |
PET Film CombinationPET Film combinations for slot and layer insulation in electrical machines and transformers |
KOMBIMAT 2339PET/PEN film combination, red, Thermal Class F(155℃) |
KOMBIMAT 24503- of 4-layer special PET film combination, Thermal Class B-F(130℃-155℃) |
KOMBIMAT 28223-layer special PET film combination, Thermal Class B(130℃) |
PET FilmsWe carry a large selection of different PET films from leading manufacturers and can offer customized solutions for just about any application |
|---|
NOMEX®We have been a distributor of DuPont Nomex throughout Europe for many years and can offer the complete range of these products. We will be happy to supply technical information and data sheets. |
|---|
ISOPREG®ISOPREG prepregs are glass fibre fabrics impregnated with epoxy resins in B-stage. The material in shaped by the user and cured under pressure and heat |
DEGLAS FG 0932Polyurethane varnished glasscloth with very high tensile strength, for overhangs and connections with tight bends and for electric machines subject to thermal stress, Thermal Class F(155℃) |
DEGLAS FG 2949Consists of electrical grade glass cloth impregnated with polyurethane varnish, Thermal Class F(155℃) |
DEGLAS DNL 2019Elastic, bias cut and seamless, designed for taping tight bends |
ISOGLAS F 0710, H 0720Unidirectional glass fibre tape with thermosetting B-stage polyester resin for end winding bracing or banding of transformer cores, Thermal Class F(155℃) for type F 0710, H(180℃) for type H 0720 |
ISOPREG EP 1069Fast curing prepreg with long shelf life, for L- and U-channels of turbogenerators, Thermal Class F(155℃) |
ISOPREG EP 2047High mechanical and chemical strength at high temperatures, used to produce e.g. turbes, plates, angels and sections and formed parts, Thermal Class H(180℃) |
ISOPREG EP 2704Prepregs with good adhesion properties for low-pressure curing, used e.g. in transformers and to produce tubes, sections and formed parts, Thermal Class H(180℃) |
ISOPREG FR 1179Halogen-free, low-smoke and flame-resistant, applications as above, Thermal Class H(180℃) |
ISOPREG MDX 1079Fast curing adhesive prepreg with long shelf life, Thermal Class B(130℃) |
ISOPREG PEN 2356Thermosetting PEN/PET film prepreg as aseparator and filler in overhang parts of endwindings or to produce moulded parts, Thermal Class F(150℃) |
ISOPREG PET 0876Thermosetting PET film prepreg, both sides coated with modified epoxy resin, Thermal Class B(130℃) |
PREFILZ 2082Epoxy/PET felt prepreg as separator and filler in overhang parts of endwindings or to produce moulded parts, Thermal Class F(155℃) |
PRINOM B 2083Thermosetting Nomex® prepreg, both sides coated with modified epoxy resin, Thermal Class H(180℃) |
PRINOM B 2913Thermosetting Nomex® prepreg, with improved edge tear strength, both sides coated with modified epoxy resin, Thermal Class H(180℃) |
PRINOM B 2919Thermosetting Nomex® prepreg, both sides coated with modified epoxy resin, Thermal Class H(180℃) |
PRINOM B 3030Thermosetting NMP Prepreg, both sides coated with modified epoxy resin, Thermal Class H(180℃) |
PRINOM B 2083Thermosetting Nomex® prepreg, one side coated with modified epoxy resin, Thermal Class H(180℃) |
PRINOM B 2084片面に改質エポキシ樹脂を施した熱硬化性Nomex® プリプレグ。耐熱温度H (180℃)。 |
PRINOM U 0622Thermosetting uncalendered Nomex® prepreg, both sides coated with modified epoxy resin, Thermal Class(180℃)。 |
SILGLAS FGSilicone/glass cloth prepreg, high tear strength, Thermal Class H(180℃) |
TRAFOGITTERFully cured acrylic-impregnated wide-meshed glass fabric, for use as a spacer in transformer casting, Thermal Class F(155℃) |
VLIESPREG 0740Epoxy-impregnated thermo-shrinking PET fleece prepreg for end winding support and final layer in transformer coils, Thermal Class F(155℃) |
VOLTAFLEXPREG 2921Thermosetting Aramid Fleece/PET film prepreg, both sides coated with modified epoxy resin, Thermal Class H(180℃) |
VOLTAFLEXPREG 2694, 2920Thermosetting DMD prepregs, both sides coated with modified epoxy resin, Thermal Class F(155℃) |
ISOPHEN 215 SVAs above, but concentrated and higher viscosity than ISOPHEN 215 SK |
ISOPHEN 215 VPhenol formaldehyde resin (resol) dissolved in methanol, without release agent, with lower viscosity for impregnation of wood veneer for the production of densified wood |
ISOPHEN 220 RMPhenol formaldehyde resin (resol) dissolved in methanol, to produce boards and tubes of paper and cotton fabric based laminates according to DIN 7735/IEC 893 |
EPOLACK 217-UEpoxy resin containing curing agent, dissolved in methyl ethyl ketone, to impregnate glass filament fabrics for laminates of Type Hgw 2372.4/G 11 according to DIN 77335/NEMA LI-1 and tubes |
VOTAFILM TPB 2101Silicone release paper, coated on both sides for use in the curing process of thermosetting resins |
VOTAFILM 2646Release film coated with silicone on both sides for use with thermosetting resins |
FLEXIBELMICANIT 2240Flexible phlogopite mica paper laminate on a sillicon resin basis for cover plates for heating elemetns, in induction furnaces, as a cavity filler, for gaskets and seals, or for insulating spacers machines subject to high thermal stress, User up to a range of 900℃-1100℃. It remains flexible even after thermal stress. |
NIPPON RIKA INDUSTRIES CORPORATION
Sales Dept of Insulating Materials
Shuichi Kawamura
Phone : +81-3-3771-0174
E-mail : isovolta@nipponrika.jp
Official Site of "Rika-FINE™System"
Please refer the link for detailed information on mica products, stator coils and resins.
Official Site for Nippon Rika MCPCB "Heat Sync"
Please refer the link for detailed information on Metal Core PCB, Power Modules, and CCL.
